CB and Scanner antenns mounted on tool box
Under Construction!
Generic Radio Shack 2' fiberglass whip for my scanner, and a 4' Firestick II for my CB.
Scanner and CB antenna mount, made out of 2" flat-iron, bent at 90 degrees.
Bolted to the side of my tool box. I didn't like the brackets that came with
the antenna mounts, they were mirrior mounts, and were kinda ugly.
I routed the 2 coax cables out of the bed through the right drain hole,
Down thew frame, and up to the hole in the firewall where the radio antenna
passes through.
