Air temp sensor MOD

Another little trick I picked up at s10.org,
Installing a 4.7K ohm 1/2 watt 5% tolerence resistor in place
of your Air temp sensor, tricks your computer into thinking that
intake air is cooler, about 40C.

What I did was hook up the resistor to one wire, and put a female connector on
the end of the resistor, and a female connector end on the other wire going to
the sensor, then I put a male connector on the wire going to the VCM

I hooked it up in the bypass mode with the resistor in place of the sensor
The other connector is there incase I need to smog the truck, hooking it up
puts the sensor back into the circut and takes the resistor out.

Back to the Tech page