CFM-Tech's High Flow GM Throttle Blade for the '96+ Vortec 4.3
Hypertech Power Programmer III In Progress
4 more KC daylighters on roof rack
| |
2" Rear wheel spacers 05-02
BUSHWACKER flares
| |
98+ console upgrade W CB mount 04-05
Offrotec locker in the front IFS diff
Finally, a locker for our front differential
| |
Shave spare tire mount / Website decals
Install custom roll pan | |
Custom Pre-runner bar retrofitted from my 99 ZR2
Submitted Modifications
| |
Poweraid Throttle body spacer
Blazer with a pickup rear bumper 3-23 Submitted by John Weicelt
| |
Custom roof rack
EGR restrictor mod
JET stage 2 power chipREMOVED I removed this mod because I am getting the Hypertech PP3
KC 100 watt Daylighters retrofitted from my 99 ZR2
|
B&M Shift Plus electronic shift improver I removed this mod because I am getting the Hypertech PP3
|
Performance Accessories 2"Body Lift
|
Fire Extinguisher mounted in cabin
|
BFG Dueler A/T 31X10.5R15's
|
Center Console switch panel
|
Lower Ball Joints - Necessary repair
2"Superlift Suspension lift
Drilled Slotted rotors There has to be some way to improve theese brakes.
Inner Fender trim to stop rubbing off road
Pro Comp 9000 shocks
Scoche single DINN head unit adapter
Rockcrawler steel rims
Custom front skid plate I had to replace that stock plastic thing
Flowmaster 40, W/ 3" pipes & new Cat
Volant cold air induction package
Cobra 40CH CB install / Antenna mount
|
Daystar Shackels (1-2 1/2" lift)
|
|
| | | | | | | | | | | | |